120w dual output switching power supply

Products Category

News

Contact Us

Name: Yueqing Kehow Electric Co.,Ltd.
Tel: 0086
Mobile: 0086 15558881002
E-mail: sales@kehow-electric.com
Add: Jinlu Industrial Zone,Beibaixiang,Yueqing, Zhejiang,China 325603
MSN: kehowelectric@hotmail.com
Skype: kehowchina
QQ: 522619385

120w dual output switching power supply

Product name : 120w dual output switching power supply

Item : D-120

Details :

120w dual output switching power supply

D-120W series normal dual switching power supply

Features：

·AC input voltage range selected by switch

·Small volume，low weight，high efficiency

·Protections：short circuit/over load/ over voltage

·LED indicator for power on

·100% full load burn-in test

·2 Year warranty

Specification details:

Model		D-120A		D-120B		D-120C
output	DC voltage	CH1:5V	CH2:12V	CH1:5V	CH2:24V	CH1:12V	CH2:24V
	Voltage tolerance	±2%	+5%~-8%	±3%	+6%~-8%	±3%	+7%~-8%
	Rated current	12A	5A	6A	4A	5A	2.5A
	Current range	2~12A	0.5~5A	1~6A	0.4~4A	1~5A	0.4~2.5A
	Rated power	120W		126W		120W
	Ripple&noise	80mvp-p	120mvp-p	80mvp-p	150mvp-p	120mvp-p	150mvp-p
	DCvoltage ADJ.range	CH1:-9%~+10%
input	Voltage range	90~132VAC/180~264VAC(selected by switch)，255~373VDC
	frequency	47~63HZ
	AC current	2.8A/115VAC，1.6A/230VAC
	efficiency	78%		80%		81%
	Inrush current	Cold start current 25A/115VAC，50A/230VAC
	Leakage current	< 3.5mA/240VAC
protection	overload	Rated output power110%~150 start over load protection
		protection type：cutoff output，recovery after restart power
	over voltage	CH1:115~135%
		protection type：cutoff output，recovery after restart power
environment	Working temp,humidity	-10℃~+60℃，20%~90%RH
	Storagetemp,humidity	-20℃~+85℃，10%~95%RH non-condensing
	Withstand vibration	10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes
safety	Withstand voltage	I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC
Fitstandard	Safety standard	Fit UL1012
	EMC standard	comply to EN55022，CLASSA
others	Dimension	19911050mm (LWH)
	Weight/packing	0.85kg/24pcs/21kg/0.043m³/1.51CUFT
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.

←[Previous : T-30] [Next : D-60]→