25w normal single switching power supply

Products Category

News

Contact Us

Name: Yueqing Kehow Electric Co.,Ltd.
Tel: 0086
Mobile: 0086 15558881002
E-mail: sales@kehow-electric.com
Add: Jinlu Industrial Zone,Beibaixiang,Yueqing, Zhejiang,China 325603
MSN: kehowelectric@hotmail.com
Skype: kehowchina
QQ: 522619385

25w single output switching power supply

Product name : 25w single output switching power supply

Item : S-25

Details :

S-25W series normal single switching power supply

Features：

·AC input voltage range selected by switch

·Small volume，low weight，high efficiency

·Protections：short circuit/over load

·cooling by free air convection

·LED indicator for power on

·100% full load burn-in test

·2 Year warranty

Specifications:

Model		S-25-12	S-25-15	S-25-24
output	DC voltage	12V	15V	24V
	Voltage tolerance	±1%	±1%	±1%
	Rated current	2A	1.6A	1A
	Current range	0~2A	0~1.6A	0~1A
	Rated power	24W	24W	24W
	Ripple&noise	100mvp-p	100mvp-p	120mvp-p
	DCvoltage ADJ.range	±10%	±10%	±10%
input	Voltage range	90~132VAC/180~264VAC(selected by switch)，255~373VDC
	frequency	47~63HZ
	AC current	0.65A/115VAC，0.35A/230VAC
	efficiency	70%	71%	74%
	Inrush current	Cold start current 15A/115VAC，30A/230VAC
	Leakage current	< 3.5mA/240VAC
protection	overload	Rated output power105%~135% start over load protection
		protection type ：part layer type current limit ，auto-recovery after fault condition is removed
	-----	-----
		-----
environment	Working temp,humidity	-10℃~+60℃，20%~90%RH
	Storagetemp,humidity	-20℃~+85℃，10%~95%RH non-condensing
	Withstand vibration	10~500HZ，2G 10min/1cycle，period for 60 minutes，each axes
safety	Withstand voltage	I/P-O/P：1.5KVAC I/P-FG：1.5KVAC O/P-FG：0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG：100M ohms/500VDC
Fitstandard	Safety standard	Fit UL1012
	EMC standard	comply to EN55022，CLASSA
others	Dimension	999735mm (LWH)
	Weight/packing	0.3kg/60pcs/19kg/0.034m³/1.2CUFT
note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.

←[Previous : S-35] [Next : S-15]→